After-sales Service: | on-Site Technical Support |
---|---|
Warranty: | 20 Years |
Type: | Tunnel Component |
Ceiling Tile Shape: | Roll |
Material: | PVC |
Thickness: | 0.7-2mm |
Customization: |
---|
Suppliers with verified business licenses
Weldable- Tight joint, leakage risk free.
Highly customized- Easy to apply, save 2/3of your money and time, supper fit for all kinds of project.
Anti-aging formula- Excellent performance, no extra maintenance needed.
Perfect detail treatment- Every component is made by professionals, we make detail treatment
perfect& easy.
Anti-corrosion for anchor steel
Store in boxes on horizontal position to prevent damage.
Avoid sun-baked and rain
Store in a clean dry location.
Add cover as necessary to protect the component from environmental damage, heat, cold or moisture etc.
How to install it:
To install the anchors, the procedure below shall be followed:
a). identify the correct position where the anchor has to be placed;
b). drill the borehole (diameter: 28 mm at least, min. depth: 210mm) through the PVC and geotextile membrane onto the substrate;
c). remove a disk (diameter: approximately 120 mm) of geotextile and PVC membrane around the hole already done corresponding to the rigid flange diameter of the anchoring system;
d). flush the hole with compressed air in order to remove dust, powder and loose or detaching part on the internal hole surface;
e). fill the hole with chemical resin for structural loads making sure that the shank of the anchoring system is placed completely inside the borehole;
f). get the heavy duty plastic collar into the borehole;
g). in order to carry out the welding properly the PVC flange (black side) and the membrane surface around the hole shall be clean and free of dust;
h). weld the PVC flange on the already installed PVC waterproofing membrane.
Why choose PENNINT?
Suppliers with verified business licenses