Colorful Red/Green Granules Bitumen Sheet for Roofing Waterproofing

Product Description

 

Product Description

BITUFLAT is a kind of flexible, polyester/fiberglass reinforced, multi-ply waterproofing sheet based on premium quality polymer bitumen compound modified, the top side surfaced with polyethylene film. AL film, colorful mineral sands or fine sand etc., and the bottom side surfaced with thermofusible polyethylene film, torched on or hot air application method should be approved.

 

     BlTUFLAT ML: membrane surfaced with colorful mineral slates or sand, commonly used for exposed flat roof project.
     BITUFLAT SD: membrane surfaced with fine sand, commonly used for unexposed roof, foundation and bridge deck project.
     BITUFLAT PE: membrane surfaced with PE film, commonly used for unexposed roof, foundation and bridge deck project.
     BITUFLAT GF: surfaced with non-woven fabric, commonly used for unexposed roof, foundation and bridge deck project.

Type	Thickness	Width	Length
BITUFLAT  PE/ML/SD/GF 3000	3 mm	1 m	10 m
BITUFLAT  PE/ML/SD/GF 4000	4 mm	1 m	10 m
BITUFLAT  PE/ML/SD/GF 5000	5 mm	1 m	7.5 m

Detailed Photos

     1. Strong impermeability, high tensile strength, large elongation, good dimensional stability, strong adaptability to base shrinkage deformation and cracking;
     2. Good high and low temperature resistance, elastomer (SBS) is suitable for building waterproof in lower temperature environment, plastic body (APP) is suitable for building waterproof in higher temperature environment;
     3. Puncture resistance, crack resistance, tear resistance, corrosion resistance, mildew resistance, weather resistance;
     4. Convenient construction, hot melt construction.

Installation Instructions

     This product is suitable for industrial and civil building roof, basement, toilet, road, bridge, tunnel, grain depot, parking lot, swimming pool, artificial lake, anti-seepage canal, log cabin, roof garden, urban greening and other projects of waterproof, anti-seepage and moistureproof and asphalt roofing maintenance projects.
     SBS modified asphalt waterproof roll is especially suitable for building waterproofing in cold areas and areas with frequent structural deformation, while APP modified asphalt waterproof roll is suitable for building waterproofing in areas with strong solar radiation.

    Installation Key Point :
         1. Substrate cleaning by broom or high pressure dusting machine
         2. Apply primer.
         3. Heat the downside membrane with high temperature flame gun.
         4. Push the heated membrane forward on primer, make sure the overlap area no less than 10 cm.
         5. Compact overlaps by a roller, firm and secure.

Workshop

 Our waterproof membrane factory is specialized in the production of high quality waterproof materials. 
 1. We are committed to providing best-in-class waterproofing solutions to meet the stringent waterproof performance requirements of the construction industry. 
 2. We are always committed to the core features of advanced technology/quality control/environmental philosophy/professional team and global supply. 
 3. We understand the importance of waterproofing, so we are committed to continuously pursuing excellence and providing our customers with the most reliable waterproofing products.

Laboratory Environment

The National Standardization Laboratory and its professional quality inspection team provide a full range of escort for product quality through strict testing process, in-depth production supervision, continuous skill improvement and continuous technological innovation, to ensure that consumers can use safe, reliable and high-quality products.

Company Profile

PENNINT is a leading and professional manufacturer of high-quality waterproofing products and related accessories. With a strong commitment to innovation and customer satisfaction, PENNINT has established itself as a trusted name in the industry.

PENNINT commits to be the one stop service platform of waterproofing systems. To achieve such goal, PENNINT produces large range of products and systems with latest technologies and standards, those ensure that PENNINT is always able to meet with customers' requirements.

As a tech-service oriented company, PENNINT has fully devoted into waterproofing industry and willing to create more value for the market.

Packaging & Shipping

FAQ

1. Q: Are you trading company or manufacturer?
A: We are manufacturer.

2. Q: How long is your delivery time?
A: Generally it is 7-10 work days after deposit and depends on your quantity.

3.  Q: Do you provide samples?
A: Yes, free sample is available. Before cooperation, delivery cost needs to be paid by customer.

4. Can You Make Our Design Or Put Our Logo On The Product?
A: Yes,We support OEM&ODM. We can put your Logo on  package.

5. Q:How do you ensure the quality?
A:We are working with there QC processes to guarantee the quality :
1. For raw materials;
2. Onsite inspection during production;
3. Final QC test for each batch of finished products.